Mountaineer AWD V8-4.6L SOHC VIN W (2002)
17. NOTE: Make sure not to damage the rubber grommet during disassembly.
Remove the windshield washer pump.
1. Disconnect the hoses.
2. Remove the pump.
18. CAUTION: Do not operate the windshield washer pump prior to filling the reservoir. Failure to do so may result in premature pump
failure.
NOTE: The windshield washer reservoir, the windshield washer pump and the windshield washer reservoir fluid level sensor are repaired
separately.
To install, reverse the removal procedure.