Mountaineer AWD V8-4.6L VIN 8 (2006)
26. Remove the sun visor center retainer.
27. CAUTION: To prevent damaging the garment hanger retainer, use a 3/16-inch flat-blade screwdriver to carry out this step.
NOTE: The garment hanger is shown without the roof sheet metal to show the metal retainer clip. The metal retainer clip will remain engaged in
the sheet metal after the garment hanger is removed.
Remove the second and third row garment hangers.
1
Open the access cover.
2
Insert the flat-blade screwdriver fully into the garment hanger slot.
3
Rotate the screwdriver 90 degrees so that the screwdriver spreads the metal retainer clip. Remove the plastic garment hanger.
28. Remove the headliner.
29. To install, reverse the removal procedure.
