Mountaineer AWD V8-4.6L VIN 8 (2006)
10. Disconnect the windshield washer reservoir hoses.
11. Remove the top bolt.
-
To install, tighten to 5 Nm (44 lb-in).
12. Remove the side bolt.
-
To install, tighten to 5 Nm (44 lb-in).
13. Remove the bolt.
-
To install, tighten to 5 Nm (44 lb-in).
14. Remove the windshield washer pump reservoir.
15. Transfer components as necessary.
16. To install, reverse the removal procedure.
