Mountaineer RWD V6-4.0L (2008)
Explorer Sport Trac
Removal and Installation
Mountaineer
1. Remove the RH quarter trim panel.
Explorer Sport Trac
2. Remove the cab rear trim panel.
Mountaineer
3. If replacing the parking aid speaker only, proceed as follows:
-
Disconnect the parking aid speaker electrical connector.
-
Remove the parking aid speaker push pins.
-
Remove the parking aid speaker.
Explorer Sport Trac
4. If replacing the parking aid speaker only, proceed as follows:
-
Disconnect the parking aid speaker electrical connector.
-
Disengage the parking aid speaker clips.
-
Remove the parking aid speaker.
All vehicles
5. If replacing the parking aid module (PAM), proceed as follows:
-
Disconnect the electrical connectors.
-
Remove the PAM screw.
-
Remove the PAM.
