Mountaineer RWD V6-4.0L (2008)
Part 2
Removal and Installation
1. Remove the roof opening panel glass.
2. Remove the trough.
-
Pull the trough assembly arms outward to release the trough assembly guide arm pins from the roof opening panel frame to remove.
3. Remove the air deflector.
-
Remove the 4 screws.
-
To install, tighten to 1 Nm (9 lb-in).
-
Remove the air deflector.
4. Slide the roof opening panel shield forward halfway.
5. Disengage the roof opening panel shield guide feet.
1
Push the roof opening panel shield toward one side of the vehicle.
2
Lift the front portion of the roof opening panel shield upward to disengage the guide feet.
