mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

5R55S - Automatic Transaxle/Transmission|Page 1586 > < 5R55S - Automatic Transaxle/Transmission|Page 1584
Page 5
background image

17. Reinstall the small (center) transmission fluid level indicating plug using a 3/16-inch Allen key.

^

Tighten to 10 Nm (89 lb-inch).

18. Check the operation of the transmission by moving the range selector lever slowly through each gear, stopping in each position and allowing the

transmission to engage.

Transmission Fluid Drain and Refill - Automated Equipment

Transmission Fluid Drain and Refill - Automated Equipment

Draining

CAUTION: Do not use water-based cleaners, mineral spirits, brake cleaner or solvents that may contain acetone, xylene or heptane to clean
and/or flush the transmission assembly, transmission components and the torque converter or transmission damage will occur. Use only clean
transmission fluid designated for the transmission/converter being serviced.

CAUTION: Always refer to the instructions supplied with the flush and fill machine or transmission damage can occur.

5R55S - Automatic Transaxle/Transmission|Page 1586 > < 5R55S - Automatic Transaxle/Transmission|Page 1584