Mountaineer RWD V6-4.0L (2008)
Removal
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the power steering pump pulley.
3. Remove the steering line clamp plate nut.
4. Rotate the steering line clamp plate and disconnect the power steering fluid cooler from the steering gear.
^
Discard the O-ring seal.
5. Disconnect the pressure line from the steering gear.
^
Discard the O-ring seal.