Mountaineer RWD V6-4.0L (2008)
Removal and Installation
All vehicles
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. CAUTION: Do not allow the steering column to rotate while the steering column shaft is disconnected or damage to the clockspring may
result. If there is evidence that the lower shaft has rotated, the clockspring must be removed and recentered.
Hold the steering wheel in the straight-ahead position using a suitable device.
2. Remove the front tires and wheels.
3. If equipped, remove the 2 bolts, pin-type retainer and the oil shield.
^
To install, tighten to 15 Nm (11 lb-ft).