mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Wheels/Tires - Popping Noise From Wheels When Turning|Page 7099 > < Wheels/Tires - Popping/Snapping Noise At Low Speeds|Page 7094
Page 1
background image

Wheels: All Technical Service Bulletins
Wheels/Tires - Popping Noise From Wheels When Turning

TSB 07-23-4

11/26/07

POPPING/SNAPPING NOISE - FRONT OR REAR 18
INCH WHEELS - TURNING AT SLOW SPEEDS
BELOW 10 MPH (16KM/H)

FORD:
2007 Edge
2007-2008 Explorer Sport Trac, Explorer

MERCURY:
2007-2008 Mountaineer

This article supersedes TSB 07-19-6 to update the vehicle lines.

ISSUE
Some 2007-2008 Explorer, Explorer Sport Trac and Mountaineer vehicles built prior to 8/17/2007 and 2007 Edge vehicles built prior to 8/24/2007 and
equipped with 18" wheels may exhibit noise coming from the front or rear wheel(s) while turning the steering wheel at speeds lower than 10 MPH (16
Km/h). The noise may be coming from the chrome cladding that attaches to the rim.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

NOTE

IF THE SOURCE OF NOISE IS NOT FROM THE WHEEL, FOLLOW NORMAL WORKSHOP MANUAL PROCEDURES.

1.

Verify the noise is coming from the wheel(s).

2.

Replace wheel(s) with updated service parts for 18" Chrome (Bright) Clad Cast Aluminum wheel and Satin Clad Cast Aluminum wheel(s). Refer
to Workshop Manual (WSM), Section 204-04.

Wheels/Tires - Popping Noise From Wheels When Turning|Page 7099 > < Wheels/Tires - Popping/Snapping Noise At Low Speeds|Page 7094