Mountaineer RWD V6-4.0L (2008)
3. Lubricate the remaining wheels at the outboard wheel flange, between the cladding and the wheel inter[ace. Use Motorcraft(R) Silicone Spray
Lubricant with an extension nozzle. (Figures 1 and 2)
4.
Clean any excess lubricant off the wheel with a soft cloth.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
091102A
2007-2008 Explorer,
0.9 Hr.
Explorer Sport Trac,
Mountaineer, 2007 Edge,
MKX:
Replace One Wheel
and Lubricate Remaining
Three Wheels. Includes
Test Drive, Transfer Tire
Pressure Monitor Sensor
(TPMS), And Balance
Wheel Assembly (Do Not
Use With 1007A, 1007A1)
091102B
2007-2008 Explorer,
1.1 Hrs.
Explorer Sport Trac,
Mountaineer, 2007 Edge,
MKX:
Replace Two
Wheels and Lubricate
Remaining Two Wheels.
Includes Test Drive,
Transfer Tire Pressure
Monitor Sensor (TPMS),
And Balance Wheel
Assemblies (Do Not Use
With 1007A, 1007A1)
091102C
2007-2008 Explorer,
1.4 Hrs.
Explorer Sport Trac,
Mountaineer, 2007 Edge,