Mountaineer RWD V6-4.0L (2008)
10. CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the transmission control module (TCM).
Electrostatic discharge may occur and may cause damage to the mechatronic unit.
With the release tab down, pull the outer shell of the bulkhead electrical connector out of the transmission control module (TCM).
11. CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the transmission control module (TCM).
Electrostatic discharge may occur and may cause damage to the mechatronic unit.
Pull the bulkhead electrical connector out of the transmission.
12. NOTE: During removal of the mechatronic, the thermal bypass valve, pump adapter seal and one or more center support seals may become
dislodged. Save these components for re-use during assembly.
Remove the 11 bolts from the mechatronic assembly and remove the mechatronic assembly.
