mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Traction Control Disable Switch <--> [Traction Control Switch] > < Anti-Lock Brake System Hydraulic Unit <--> [Hydraulic Control Assembly - Antilock Brakes]|Diagrams|Page 6758

Mystique L4-122 2.0L DOHC VIN 3 SFI (1995)

Page 1
background image

Traction Control Module: Service and Repair

1. Disconnect battery ground cable.
2. Disconnect traction assist control electrical connector.
3. Remove plastic cover from traction assist control.

Accelerator Cable Removal From Upper Pulley

4. Rotate traction assist control upper pulley and disconnect accelerator

cable from upper pulley.

Accelerator Cable Removal From Lower Pulley

5. Rotate traction assist control lower pulley and disconnect accelerator cable from lower pulley.
6. Slide accelerator cables out of traction assist control housing.
7. Remove two traction assist control retaining bolts and traction assist control from mounting bracket.
8. Reverse procedure to install.

Traction Control Disable Switch <--> [Traction Control Switch] > < Anti-Lock Brake System Hydraulic Unit <--> [Hydraulic Control Assembly - Antilock Brakes]|Diagrams|Page 6758