Mystique L4-122 2.0L DOHC VIN 3 SFI (1995)
Fig. 5 Righthand front engine support insulator replacement. Manual transaxle
2. Remove through bolt from righthand front engine support insulator.
3. Remove righthand front engine support insulator to front subframe bolts, then insulator.
WARNING: When removing righthand front engine support insulator, always disconnect battery ground cable prior to removal.
Contact of righthand front engine support insulator to alternator output terminal with battery connected may short alternator and
battery to ground, causing possible injury and damage to vehicle.
4. if necessary, remove righthand front engine support bracket from transaxle.
INSTALLATION
1. Install righthand front engine support bracket to transaxle.
2. Position righthand front engine support insulator to front subframe, then install and loosely tighten bolts.
3. Install righthand front engine support insulator through bolt and loosely tighten.
4. Remove two front subframe through bolts and lefthand front engine support insulator bolt.
