mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

EGR Tube > < Buzzing Noise From Electronic Vacuum Regulator|Page 4262
Page 1
background image

EGR Electronic Vacuum Regulator Solenoid: Service and Repair

Vacuum Regulator Solenoid

1. Disconnect battery ground cable.
2. Disconnect engine control sensor wiring and vacuum hoses from Exhaust Gas Recirculation (EGR) vacuum regulator control.
3. Remove retaining bolts and EGR vacuum regulator control from dash panel.
4. To install, reverse removal procedure. Tighten retaining bolts securely.

EGR Tube > < Buzzing Noise From Electronic Vacuum Regulator|Page 4262