Mystique L4-122 2.0L DOHC VIN 3 SFI (1995)
Idle Air Control (IAC) Valve: Service and Repair
Idle Air Control Valve
REMOVAL
1. Disconnect battery ground cable.
2. Raise vehicle on hoist.
3. Disconnect the electrical connector from the Idle Air Control (IAC) valve.
4. Remove the two IAC valve retaining bolts.
5. Remove the IAC valve and gasket.
INSTALLATION
1. Clean IAC valve gasket mating surfaces.
NOTE: If scraping is necessary, be careful not to damage IAC valve or intake manifold gasket surfaces, or drop material into intake manifold.
2. To install IAC valve, reverse removal procedure.
3. Tighten the retaining bolts to 8-11 Nm (71-97 in lb).
