Mystique L4-122 2.0L DOHC VIN 3 SFI (1995)
Ignition Cable: Service and Repair
Spark Plug Wire Routing
REMOVAL
CAUTION: Do not pull on the ignition wire directly as the wire may separate from the connector inside the boot.
1. Disconnect ignition wires from spark plugs by grasping the ignition wire spark plug boot and twisting slightly in both directions to free it.
Removing Ignition Wires At Coil Pack
2. Disconnect the ignition wires from the ignition coil by squeezing the locking tabs and twisting while pulling upward.
3. Open ignition wire separators and remove ignition wire.
INSTALLATION
