mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

A/T - CD4E Fluid Leak From Fill Tube/Seepage From Vent|Page 5482 > < A/T - CD4E Fluid Leak From Fill Tube/Seepage From Vent|Page 5480
Page 5
background image

3.

Install tube assembly on air cleaner housing and align white dot with retaining bracket closest to front of vehicle. Insert 90 degree elbow end of
tube assembly into air cleaner clamp. Allow approximately 25 mm (1") of free tube (Figure 4).

CONTOUR/MYSTIQUE, COUGAR

1.

Fully seat straight end of tube onto brazed fitting on main control cover. Mount clamp securely onto brazed fitting to secure tube assembly (Figure
3).

2.

Route tube assembly upward toward the rear of the battery (Figure 5).

A/T - CD4E Fluid Leak From Fill Tube/Seepage From Vent|Page 5482 > < A/T - CD4E Fluid Leak From Fill Tube/Seepage From Vent|Page 5480