Mystique V6-153 2.5L DOHC VIN L SFI (1999)
2.
Locate the constant tension clamp at the lower radiator hose-to-coolant crossover pipe connection. See Figure 1.
3.
Move the clamp approximately 1/4 to 1/2 inch down the hose and secure over the flange on the end of the coolant crossover pipe. See Figure 2.
4.
Install a new clamp (B7AZ-8287-C) in the original location of the constant tension clamp. Tighten the clamp to 2 Nm (18 lb-in). See Figure 2.
5.
Lower the vehicle.
6.
Start the engine and check for leaks.