mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Air Door Actuator|Page 7234 > < Air Door Actuator
Page 2
background image

3. Remove the floor console.

4. Remove the actuator.

1

Unclip the actuating rod.

2

Disconnect the hoses with the connector.

3

Remove the two nuts.

INSTALLATION

1. To install, reverse the removal procedure.

Recalculation/Fresh

REMOVAL

1. Remove the radio amplifier (if equipped).
2. Remove the anti-theft/central locking module (if equipped).

3. Remove the glove box screws and the glove box.

4. Unclip the upper footwell trim panel on the passenger side and remove it.

Air Door Actuator|Page 7234 > < Air Door Actuator