mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Back Flushing-Heater Core|Page 7389 > < Back Flushing-Heater Core
Page 1
background image

Heater Core: Service and Repair
Removal and Installation

REMOVAL

1. Disconnect the battery ground cable.
2. Drain the cooling system.
3. Raise and support the vehicle.

4. Disconnect the heater hoses from the heater core.

^

Disconnect the vacuum line from the engine.

5. Lower the vehicle.
6. Remove the floor console.

7. Detach the Air Bag Diagnostic Monitor and position aside.

8. Disconnect the vacuum supply line from the vacuum reservoir tank.

Back Flushing-Heater Core|Page 7389 > < Back Flushing-Heater Core