mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Instrument Panel, Gauges and Warning Indicators|Contour|Page 8325 > < Clock /Timekeeping|Page 8322
Page 1
background image

Clock: Service and Repair
Contour

REMOVAL

1. Disconnect the battery ground cable.

2. Release the clock from the instrument cluster bezel.

^

Lever the clock Out from the right - hand lower corner first.

3. Remove the clock.

^

Disconnect the electrical connector.

INSTALLATION

1. To install, reverse the removal procedure.

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

Instrument Panel, Gauges and Warning Indicators|Contour|Page 8325 > < Clock /Timekeeping|Page 8322