mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Air Filter Element > < Drive Belt|Page 1093
Page 1
background image

Air Cleaner Fresh Air Duct/Hose: Service and Repair

REMOVAL

1. SVT only, disconnect the Intake Air Temperature (IAT) sensor electrical connector.

2. Disconnect the intake air bypass hose and the Positive Crankcase Ventilation (PCV) hoses from the air cleaner outlet pipe.

3. Remove the air cleaner outlet pipe.

INSTALLATION

1. To install, reverse the removal procedure.

Air Filter Element > < Drive Belt|Page 1093