mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Recall - Fuel Line Seepage|Page 3786 > < Recall - Fuel Line Seepage|Page 3784
Page 8
background image

6.

Install extra routing clip as shown in Figure 6. Make sure base of the clip is facing the floor pan of the vehicle (open side facing down).

7.

Cycle ignition key five (5) times to pressurize fuel system. Check the fuel line for seepage.

8.

Lower vehicle.

9.

Fill out and attach "Authorized Modifications Label" as outlined at the end of these instructions.

AUTHORIZED MODIFICATIONS LABEL

Recall - Fuel Line Seepage|Page 3786 > < Recall - Fuel Line Seepage|Page 3784