mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|00-10-2 > < Engine - Spark Knock on Cruise/Acceleration|Page 4267
Page 3
background image

4.

Use the PCM part number to identify the vehicle's existing calibration by referring to the PCM Calibration Information Chart as shown.

NOTE:

IF THE PCM PART NUMBER OBTAINED HAS SEVEN (7) DIGITS, DISREGARD THE LAST (7th) DIGIT AND USE ONLY THE FIRST
SIX (6) DIGITS WHEN REFERRING TO THE CHART. IF THE PCM PART NUMBER OBTAINED HAS SIX (6) DIGITS, DISREGARD THE
LAST (6th) DIGIT AND USE ONLY THE FIRST FIVE (5) DIGITS WHEN REFERRING TO THE CHART.

5.

Once the existing calibration has been identified, reprogram the PCM to the latest calibration revision level.

Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage And Emissions Warranty Coverage

Operation/Description/Time

DEALER CODING

OASIS CODES: 497000, 615000, 615500, 615600, 702100

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|00-10-2 > < Engine - Spark Knock on Cruise/Acceleration|Page 4267