mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Throttle Position Sensor > < Inertia Fuel Shutoff Switch|Diagrams
Page 1
background image

Inertia Fuel Shutoff Switch: Service and Repair

REMOVAL

1. Remove the left hand cowl side trim panel. 

2. Detach the insulation material from around the Inertia Fuel Shutoff (IFS) Switch.

3. Remove the IFS switch retaining screws.

4. Disconnect the electrical connector and remove the IFS switch.

INSTALLATION

1. To install, reverse the removal procedure.

Throttle Position Sensor > < Inertia Fuel Shutoff Switch|Diagrams