mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Axle Shaft|Removal and Installation|Page 5097 > < Axle Shaft|Removal and Installation|Page 5095
Page 8
background image

Loosen the suspension strut nut five turns.

2. Loosen the wheel hub retaining nut and the wheel nuts.
3. Raise and support the vehicle. 
4. Remove the wheel.
5. Remove the wheel hub retaining nut.
Vehicles with automatic transaxle

6. Drain the automatic transmission fluid. 

7. Remove the splash shields.

8. CAUTION: Do not damage the CV joint and the wheel speed sensor ring. 

Axle Shaft|Removal and Installation|Page 5097 > < Axle Shaft|Removal and Installation|Page 5095