Mystique V6-153 2.5L DOHC VIN L SFI (1999)
The input and output shafts are each seated in one taper roller bearing in the transaxle housing section on the clutch side and one taper roller bearing in
the transaxle housing section on the transaxle side.
The output shaft drive pinion is in constant engagement with the differential drive annulus.
The third and fourth gears and the third/fourth gear synchronizer are located on the input shaft. The teeth for first and second and reverse gear are an
integral part of the input shaft.
The first, second, fifth and reverse gears and the first/second gear synchronizer and fifth/reverse gear synchronizer are located on the output shaft. The
teeth for third and forth gear are an integral part of the output shaft.
