mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Transmission Speed Sensor, A/T > < Transmission Range Sensor <--> [Transmission Position Switch/Sensor, A/T]|Specifications|Page 5577
Page 2
background image

Position the Transmission Range (TR) sensor and loosely install the bolts.

2. NOTE:  As necessary, move the manual control lever to N position for TR sensor adjustment.

Rotate the manual valve detent lever assembly to the Neutral position.
1. Low 1
2. Low 2
3. Drive
4. Neutral
5. Reverse
6. Park

3. Install the TR sensor.

1. Using the special tool, align the TR sensor.
2. Tighten the bolts and remove the special tool.
3. Connect the electrical connector.

4. Install the battery tray.

5. NOTE:  When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its

adaptive strategy. The vehicle may need to be driven 16 Km (10 miles) or more to relearn the strategy.

Connect the battery ground cable.

6. Check the proper operation with parking brake control engaged. The engine should start only in PARK or NEUTRAL. Backup lamps should

active only in reverse position.

Transmission Speed Sensor, A/T > < Transmission Range Sensor <--> [Transmission Position Switch/Sensor, A/T]|Specifications|Page 5577