mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Fuel System - Injector Tester/Cleaner Service Tips|Page 9066 > < Fuel System - Injector Tester/Cleaner Service Tips|Page 9064
Page 3
background image

NOTE:
DOOR TRIM REMOVAL IS NOT REQUIRED.

2.

Position new handle and install retaining bolt. Tighten screw to 7-11 N-m (5-8 lb.ft.).

PARTS PURGE

^

Return obsolete inside door handles (E8DZ-5422600-G and E8DZ-5422601-G) to your facing PDC using the least expensive transportation.

^

Complete a separate FPS-340 claim for these parts.

^

Indicate Reason "J" on the claims.

^

In the Remarks Section write "Returned per TSB 92-12-2.

LIMITS

^

The returns must have been received within 30 days from the date of TSB 92-12-2 (6-3-92).

^

Returns are restricted to the subject parts.

^

The parts returned must have been purchased from FPSD in accordance with Policy and Procedure Bulletin 4000.

CREDIT

Credit for parts and prepaid freight costs will be issued.

NOTE:
REPLACEMENT STOCK IS AVAILABLE FOR ORDERING IMMEDIATELY.

Part Number

OTHER APPLICABLE ARTICLES:
NONE

SUPERSEDES:
92-12-2

WARRANTY STATUS:
Eligible Under Basic Warranty Coverage

OPERATION DESCRIPTION

TIME

921801A

Replace One Handle

0.3 Hr.

921801B

Replace Two Handles

0.4 Hr.

921801C

Replace All Handles

0.7 Hr.

DEALER CODING 

BASIC PART NO.

CONDITION CODE

7022601

01

OASIS CODES:
107000, 112000

Technical Service Bulletin # 92181

Date: 920826

Inside Door Handles - Broken

Article No.
92-18-1

Fuel System - Injector Tester/Cleaner Service Tips|Page 9066 > < Fuel System - Injector Tester/Cleaner Service Tips|Page 9064