Sable V6-182 3.0L (1986)
6.
Install the new striker with the two new screws included in the kit. The striker should be positioned as high as the adjustment slots allow. Tighten
the screws just enough to hold the striker in place.
7.
Lower the storage compartment cover and lift the latch handle to close it. Lock with key and check flushness. Adjust the striker as required until
panel is flush. Insert key and check locking function.
8.
After checking flushness, tighten the striker attaching screws.
OPTIONAL PICNIC TRAY, LABEL INSTALLATION
1.
Lock the storage compartment latch with a key.
2.
Pull the picnic tray latch handle and lift the tray toward the rear of the car. See Figure 2.
3.
Place the label on the exposed surface of the load floor panel as shown. The label should be located approximately 4 inches forward in vehicle
from the load floor latch and centered left to right.
Owner Letter
Serial Number: 12345678901234567 92S47 Date here
Mr. John Sample
