Sable V6-182 3.0L (1986)
Brake Drum: Service and Repair
Installation
Rear Drum Brakes
1. If inner or outer bearing cups were removed, install replacement cups using driver handle T80T-4000-W and bearing cup replacers T73F-1217-A
and T77F-1217-B or equivalent.
CAUTION: Do not use cone and roller assembly to Install cup as this will cause damage to bearing cup, cone and roller assembly.
Installing Bearing Cups
-
Support drum hub on wood block to prevent damage. Be sure to seat cups properly in hub.
2. Make sure all spindle and bearing surfaces are clean.
3. Using a bearing packer, pack the bearing assemblies with multi-purpose long-life lubricant C1AZ-19590-B or equivalent grease. If a packer is not
available, work in as much specified grease as possible between rollers and cages. Grease cup surfaces.