mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Heater - Insufficient Heat to Floor Area|Page 8160 > < Heater - Poor Performance In Extreme Cold|Page 8151
Page 1
background image

Air Duct: All Technical Service Bulletins
Heater - Insufficient Heat to Floor Area

Article No. 86-4-5

HEATER - INSUFFICIENT AIR FLOW TO THE FRONT FLOOR AREA

FORD 1986 TAURUS

LINCOLN-MERCURY 1986 SABLE

Customer concerns of insufficient air flow to the front floor area can be improved by reworking the heater system using the following procedure.

1.

Remove the floor duct from the vehicle as follows:

a.

Remove the instrument panel brace located above the accelerator pedal and next to the floor duct.

b.

Remove the two screws attaching the floor duct to the evaporator assembly.

c.

Pull the dash panel edge of the carpet rearward (toward seat), then pull the floor duct down and toward the cowl to disengage it from the rear
seat duct and remove the floor duct from the passenger side.

Heater - Insufficient Heat to Floor Area|Page 8160 > < Heater - Poor Performance In Extreme Cold|Page 8151