Sable V6-182 3.0L (1986)
12. Complete installation of front suspension components. See: Steering and Suspension/Suspension/Control Arm/Service and Repair
13. Install wheel and tire assembly, tightening wheel lug nuts finger-tight.
14. Lower vehicle and block wheels to prevent vehicle from rolling.
15. Tighten wheel lug nuts to 109-142 NM (80-105 ft-lbs).
WARNING: REPLACEMENT LUG NUTS OR STUDS MUST BE OF THE SAME TYPE AND SIZE AS THOSE BEING REPLACED.
16. Tighten hub but to 245-270 NM (180-200 ft-lbs).
17. Install wheelcover or hub cover and lower vehicle completely to the ground.
18. Remove wheel blocks.
