Sable V6-182 3.0L (1986)
Charts, For Vehicle
Application.
912507U
Service Kit Install -
1.2 Hr.
Aerostar, Econoline -
Refer To Service Procedure
Application Charts - For
Vehicle Application.
DEALER CODING
BASIC PART NO.
CONDITION CODE
9E926
49
OASIS CODES:
602300, 607000, 607400, 607700, 608400, 611500, 618400
Technical Service Bulletin # 862418
Date: 861205
Engine - Rolling Idle/Body Boom/Stalling
Article No. 86-24-18
IDLE - ROLLING - WARM/COLD ENGINE - 3.0L IMPROVED PROCESSOR
STALLS - COLD START - 3.0L -
IMPROVED PROCESSOR
IDLE - BODY BOOM - 3.0L IMPROVED PROCESSOR
FORD 1986 TAURUS
LINCOLN-MERCURY 1986 SABLE
CALIBRATION: 3.0L
WARNING:
This modification is authorized only for the listed engines. Performing this modification on other engine calibrations is unauthorized and
could create liability under applicable federal or local laws.
Rolling idle, body boom or stalls after cold start may be caused by the fuel and idle speed control strategies of the engine calibration. To correct this,
install a new processor assembly, E6DZ-12A650-MK (50 State) or E6DZ-12A650-AFK (Canada) using the following service procedure.
1.
Install processor assembly E6DZ-12A650-MK (50 State) or E6DZ-12A650-AFK (Canada).
2.
Set the curb idle (hardstop) to 760 RPM using the following procedure.
NOTE:
If the following procedure is not performed, an improper idle speed and unacceptable driveability will result.
3.
Place the transmission in Neutral or Park, turn the A/C-Heat selector lever to the "Off" position. Apply the parking brake and block the wheels.
4.
Bring the engine to normal operating temperature. Check for vacuum leaks downstream of the throttle plates. Service as required.
5.
Unplug the SPOUT connector and verify the ignition initial timing is 10~ BTDC +/- 2~. If the initial timing is not to specification, service as
required.
