mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Customer Interest: > < Ignition Key Warning Switch - Replacement Procedure|Page 805
Page 1
background image

Key Reminder Switch: All Technical Service Bulletins
Ignition Switch - Warning Buzzer/Chime Will Not Shut OFF

Article No. 86-6-8

IGNITION SWITCH - WARNING BUZZER/CHIME WILL NOT SHUT OFF WHEN KEY IS REMOVED

FORD 1986 TAURUS

LINCOLN-MERCURY 1986 SABLE

Ignition key warning buzzer/chime that will not shut off when key is removed from the lock cylinder is caused by the key warning connector/switch not
being completely engaged on the ignition lock cylinder housing.

Figure 5A

Dealers encountering this concern should remove the ignition lock cylinder per Section 31-20 of the Shop Manual and check to make sure that the
connector/ switch is properly installed. (Locking finger of connector completely over locking ramp on housing.) See Figure 5A.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Customer Interest: > < Ignition Key Warning Switch - Replacement Procedure|Page 805