mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

A/T - AXOD/AXODE Revised Direct One Way Clutch|Page 5772 > < A/T - AXODE No Forward & No Reverse Gears|Page 5767
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - AXOD/AXODE Revised Direct One Way Clutch

Article No. 
92-26A-9

12/16/92

^

TRANSMISSION - AXOD - REVISED DIRECT ONE-WAY CLUTCH

^

TRANSMISSION - AXODE - REVISED DIRECT ONE-WAY CLUTCH

FORD:
1986-92 TAURUS

LINCOLN-MERCURY: 
1986-92 SABLE 
1989-92 CONTINENTAL

ISSUE:
The direct one-way clutch assembly has been revised to incorporate the use of new nylon material in the construction of the cage. During installation of
the one-way clutch it is important that correct rotational direction is maintained.

ACTION:
When installing the one-way clutch assembly, be sure to observe the following installation guidelines.

^

The two (2) circular depressions on the roller pockets of the nylon cage must be visible when the one-way clutch is installed on inner race.

^

The reaction ears in the cage must match the hook in the inner race cam.

^

The outer race must rotate clockwise and must not rotate when turned in the counter clockwise direction. Refer to Figure 1.

This new direct one-way clutch assembly may be used for service on all AXOD and AXODE transaxles.

OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 92-18-9

WARRANTY STATUS: INFORMATION ONLY

OASIS CODES:

A/T - AXOD/AXODE Revised Direct One Way Clutch|Page 5772 > < A/T - AXODE No Forward & No Reverse Gears|Page 5767