mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Power Windows - Groaning Noise|Page 11488 > < Manual Vent Windows - Hard to Open
Page 1
background image

Window Regulator: All Technical Service Bulletins
Power Windows - Groaning Noise

Article No.
95-20-3

10/11/95

^

POWER WINDOW - FRONT - "GROANING" NOISE AFTER GLASS IS POWERED FULL UP

^

NOISE - "GROANING" FROM FRONT POWER WINDOW AFTER GLASS IS POWERED FULL UP

FORD: 
1986-95 TAURUS
1989-91 THUNDERBIRD

LINCOLN-MERCURY: 
1986-95 SABLE
1988-94 CONTINENTAL
1989-91 COUGAR

This TSB is being republished in its entirety to include the 1992-95 Taurus, Sable and Continental vehicles.

ISSUE: 
A "groaning noise may come from the front power windows after the glass is powered full up. This noise is caused by improper lubrication on the 
window regulator mechanism sliding surfaces. The grease gets wiped off from sliding surfaces during normal operation.

ACTION: 
Apply teflon lubricant (D2AZ-19590-A) to the window regulator mechanism sliding surfaces. This is a longer lasting lubricant with a lower friction
characteristic than the polyethelene grease specified in the Service Manuals. Refer to the following procedure for service details.

SERVICE PROCEDURE

1.

Remove the interior door trim as outlined in the appropriate Service Manual, Section 45-03 for 1986-91 and Section 01-05 for 1992-95 vehicles.

2.

Refer to the appropriate Service Manual, Section 42-01 for 1986-91 and Section 01-11 for 1992-96 vehicles for lubrication points on the window
regulator.

3.

Apply a generous amount of teflon lubricant (D2AZ-19590-A) to the window regulator mechanism, especially to the window regulator channels,
Figure 1.

PART NUMBER

PART NAME

D2AZ-19590-A

Teflon Lubricant

Power Windows - Groaning Noise|Page 11488 > < Manual Vent Windows - Hard to Open