mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Windshield Washer - Washer Nozzle Aimed Too Low|Page 11641 > < Windshield Washer - Washer Nozzle Aimed Too Low|Page 11635
Page 1
background image

Windshield Washer Spray Nozzle: Customer Interest
Windshield Washer - Washer Nozzle Aimed Too Low

Article No 86-17-8

WIPER/WASHER-WASHER AIM TOO LOW FORD 1986 TAURUS

LINCOLN-MERCURY 1986 SABLE

Windshield washer nozzles that spray too low on the windshield can be corrected by installing tape shims under the washer nozzles using the following
procedure.

1.

Remove the wiper arm and blade assembly by applying downward pressure on the wiper arm head while holding arm head. Lift the arm to the
highest position. Using finger pressure only, grasp the slide latch tab and slide the latch out from under the arm head. Remove the arm and
blade assembly.

CAUTION: To prevent glass and/or paint damage, do not pry the arm pivot with metal or a sharp tool.

2.

Remove the cowl vent screen and washer nozzles.

Windshield Washer - Washer Nozzle Aimed Too Low|Page 11641 > < Windshield Washer - Washer Nozzle Aimed Too Low|Page 11635