Sable V6-183 3.0L VIN U FI (1998)
3. Attach cable end to parking brake lever. Install cable retaining clip on rear disc brake caliper assembly.
4. Using new washers, connect rear wheel brake hose to rear disc brake caliper. Tighten retaining bolt to 41 - 54 Nm (31 - 39 ft. lbs.).
5. Bleed serviced caliper.
6. Install wheel and tire assembly on vehicle. Tighten lug nuts to 115 - 142 Nm (85 - 104 ft. lbs.) using Rotunda Accutorq Lug Nut Socket
164-R0303 or equivalent, on a 1/2 inch air impact wrench or use a torque wrench.
CAUTION: Failure to tighten lug nuts in a star pattern may result in high rotor runout, which will speed up the development of brake roughness,
shudder and vibration.
7. Lower vehicle.
