Sable V6-183 3.0L VIN U FI (1998)
Brake Hose/Line: Testing and Inspection
Brake Hose
Inspect the brake lines and hoses for cracks, swelling or other damage and replace if necessary.
Only steel tubing manufactured specifically for brake systems should be used throughout the brake system with the exception of the flexible hoses at
the front and rear wheels. Check fluid level. If the fluid level is below the line in the brake master cylinder reservoir, add the required amount of fluid.
Use High Performance DOT-3 Motor Vehicle Brake Fluid C6AZ-19542-AB or DOT-3 equivalent meeting Ford specification ESA-M6C25-A.
