Sable V6-183 3.0L VIN U FI (1998)
Oil Pressure Sender: Service and Repair
REMOVAL
1. Disconnect the engine control sensor wiring from the oil pressure sensor.
2. Remove the oil pressure sensor from the cylinder block.
INSTALLATION
1. Follow removal procedure in reverse order.
NOTE: Apply Pipe Sealant with Teflon D8AZ-19554-A or equivalent meeting Ford specifications ESR-M 18P7-A and WSK-M2G350-A2 prior
to installation.
2. Tighten to 16-22 Nm (12-16 ft. lbs.).
