Sable V6-183 3.0L VIN U FI (1998)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Cycling Switch
REMOVAL
1. Disconnect wire harness connector from A/C cycling switch.
2. Unscrew A/C cycling switch from top of suction accumulator/drier.
INSTALLATION
1. Install new O-ring seal, lubricated with Motorcraft YN-12b refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B on the A/C
cycling switch fitting.
2. Lubricate the O-ring seal on the suction accumulator/drier nipple with clean Motorcraft YN-12b refrigerant oil or equivalent meeting Ford
specification WSH-M 10231-B.
3. Screw A/C cycling switch on suction accumulator/drier nipple and hand tighten.
4. Connect wire connector to A/C cycling switch.
5. Check A/C cycling switch installation for refrigerant leaks.
6. Check system for proper operation.
