Sable V6-183 3.0L VIN U FI (1998)
Daytime Running Lamp Control Unit: Service and Repair
Control Module, Daytime Running Lamp (DRL)
REMOVAL
WARNING: DAYTIME RUNNING LAMPS CONTROL GETS VERY HOT DURING OPERATION. BE SURE DAYTIME RUNNING
LAMPS CONTROL HAS COOLED BEFORE HANDLING IT OR PERSONAL INJURY MAY OCCUR.
1. Disconnect DRL control electrical connector.
2. Remove screw retaining daytime running lamps control to front fender apron and remove daytime running lamps control.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten screw to 2-3 N.m (18-26 Lb-In).
