Sable V6-183 3.0L VIN U FI (1998)
Wheels: Service and Repair
Replacement Notes
Wheels must be replaced under any of the following conditions:
^
bent
^
dented
^
heavily rusted
^
have air leaks (aluminum wheels can, in most cases, be serviced using the procedure in Cleaning and Inspection)
^
have elongated bolt holes
^
have excessive lateral or radial runout
Wheels with a lateral or radial runout greater than the recommended specification may cause an objectionable high-speed vehicle vibration.
Replacement wheels must be equal to the original equipment wheels in all of the following parameters:
^
load capacity
^
diameter
^
width
^
offset and mounting configuration
An improper wheel may affect the following:
^
wheel and front wheel bearing life
^
ground and tire clearance
^
speedometer and odometer calibrations