mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Information Bus|Testing and Inspection > < Multiplex Communication Network|Page 3664
Page 2
background image

The information is designed to diagnose any diagnostic communication network concerns.

These concerns may:
-

affect normal functional operations of the vehicle.

-

be directly related to customer concerns.

-

be undetectable except during diagnostics.

To properly diagnose a network concern, follow the diagnostic procedure in the order presented.

MODULE IDENTIFICATION 

Modules included on this diagnostic communication network include:

Electronic Crash Sensor (ECS): 
-

located behind the instrument panel to the right of the steering column.

-

a failed Electronic Crash Sensor (ECS) may cause a no communication condition on the diagnostic communication network.

-

if communication to the ECS fails, refer to Air Bags (Supplemental Restraint Systems) to diagnose ECS related concerns.

Anti-Lock Brake System (ABS) Control Module: 
-

located under the battery tray in the lower left of the engine compartment.

-

a failed ABS module may cause a no communication condition on the diagnostic communication network.

-

if communication to the ABS module fails, refer to Antilock Brake System to diagnose ABS module related concerns.

Generic Electronic Module (GEM): 
-

is plugged into the fuse junction panel.

-

a failed GEM may cause a no communication condition on the diagnostic communication network.

-

if communication to the GEM fails, refer to the affected sub-system (such as Wiper and Washer Systems or Courtesy Lamps etc.) for No
Communication testing.

Remote Anti-Theft Personality (RAP) Module: 
-

located under the instrument panel to the right of the steering column.

-

a failed Remote Anti-Theft Personality (RAP) module may cause a no communication condition on the diagnostic communication link.

-

if communication to the RAP module fails, refer to Keyless Entry for RAP Module related concerns.

Semi-Active Ride Control (SARC): 

-

located in the luggage compartment on the front of the RH rear wheel housing.

-

if communication to the SARC module fails, refer to Automatic Suspension to diagnose SARC module related concerns.

Information Bus|Testing and Inspection > < Multiplex Communication Network|Page 3664