Sable V6-183 3.0L VIN U FI (1998)
Pressure Feedback Exhaust Sensor: Service and Repair
REMOVAL
1. Disconnect engine control sensor wiring from EGR backpressure transducer.
2. Disconnect EGR backpressure transducer hoses from EGR valve to exhaust manifold tube.
3. Remove retaining nuts or bolts (depending upon application) and EGR backpressure transducer.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining nuts or bolts (depending upon application) to 5-7 Nm (45-61 lb-in).
