mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Throttle Cable/Linkage|Testing and Inspection > < Throttle Body|Specifications|Page 4444
Page 1
background image

Throttle Cable/Linkage: Specifications

Accelerator Cable Bracket Bolts ........................................................................................................................................................ 8-10 Nm (71-88 Lb/In)
Accelerator Pedal and Shaft Retaining Nuts .................................................................................................................................... 15-20 Nm (12-14 Lb/Ft)
Accelerator Cable-to-Accelerator Cable Bracket Bolt ......................................................................................................................... 5-7 Nm (45-61 Lb/In)
Accelerator Cable-to-Dash Panel Bolts .......................................................................................................................................... 1.6-2.2 Nm (15-19 Lb/In)
Speed Control Actuator Cable to Bracket Bolt .................................................................................................................................... 5-7 Nm (45-61 Lb/In)
Accelerator Control Splash Shield to Bracket Bolts ............................................................................................................................. 5-7 Nm (45-61 Lb/In)

Throttle Cable/Linkage|Testing and Inspection > < Throttle Body|Specifications|Page 4444