Sable V6-183 3.0L VIN U FI (1998)
6. Remove tool. Install clutch pack, direct clutch pressure plate and clutch pressure plate retaining ring.
NOTE: Number of clutch plates may vary with application.
7. Install clutch pressure plate retaining ring. Check clutch pack clearance using Dial Indicator with Magnetic Base D78P-4201-B or equivalent. Push
firmly downward on the clutch pack. Release pressure and zero the dial indicator. Lift pressure plate to the bottom of the snap ring. Note dial
indicator reading. Take two readings, 180 ° apart, and determine the average of the two readings. The clearance should be 1.28-1.76 mm
(0.050-0.069 inch).
8. If clearance is not within specifications, selective retaining rings are available in the following thicknesses:
9. After installing correct retaining ring, recheck clearance.
AX4S
