Sable V6-183 3.0L VIN U FI (1998)
2. Install RH differential fluid seal using Output Seal Replacer 307-157 (T86P-1177-13) with Output Shaft Seal Replacer Pilot 307-317
(T94P-77001-JH).
3. Install both halfshafts into vehicle.
4. Install front tire and wheel assemblies.
5. Lower vehicle.
AX4N
REMOVAL
1. Raise and suitably support vehicle on hoist.
2. Remove front tire and wheel assemblies.
3. Remove both halfshafts from vehicle.
4. Install Front Cover Seal Remover 303-107 (T74P-6700-A) and 5 1/2-inch forcing screw (from Crankshaft Seal Replacer/Cover Aligner 303-335
(T88T-6701-A))into LH differential seal.