Sable V6-232 3.8L (1988)
1.
Remove and discard the existing 9M bolt from the hinge assembly, refer to Figure 1.
2.
Enlarge the bolt hole by drilling with a 21/64" (8.4 mm) drill.
3.
Tap new threads in the hole using a 10 X 1.50 metric tap.
4.
Install new M10 bolt and torque to 30-47 Ft.Lbs. (40-64 N-m).
PART NUMBER
PART NAME
CLASS
N605798-S100
Bolt (M10 X 1.50 X 16M,
S
Pkg/4)
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION DESCRIPTION
TIME
930203AT
Replace Bolt - Both Sides
0.5 Hr.
930203A
Replace Bolt - One Side
0.3 Hr.
DEALER CODING
BASIC PART NO.
CONDITION CODE
7026802
57
OASIS CODES:
111000, 702200
Technical Service Bulletin # 9323
Date: 930118
Lower Rear Door Hinge/Check - Loose/Noisy
Article No.
93-2-3
01/18/93
^
DOOR - REAR - LOOSE BOLT ON LOWER HINGE AND CHECK ASSEMBLY
